Aluminium Extrusion Fabrication With Punching, Milling,Drilling Processing
Deep processing: Milling, Cutting,Drilling
Primary Technical Data
1) Chemical composition
| Alloy |
Si |
Mg |
Fe |
Cu |
Mn |
Zn |
Cr |
Ti |
| 6063 |
0.2~0.6 |
0.45~0.90 |
<0.35 |
<0.10 |
<0.10 |
<0.10 |
<0.10 |
<0.10 |
| 6060 |
0.3~0.6 |
0.35~0.60 |
0.1~0.3 |
~ |
<0.10 |
<0.15 |
<0.05 |
~ |
| 6463 |
0.2~0.6 |
0.45~0.90 |
<0.15 |
<0.20 |
<0.05 |
<0.05 |
~ |
~ |
| 6005 |
0.6~0.9 |
0.40~0.60 |
<0.35 |
<0.10 |
<0.10 |
<0.10 |
<0.10 |
<0.10 |
| 6061 |
0.4~0.8 |
0.80~1.2 |
<0.70 |
0.15~0.4 |
<0.15 |
<0.25 |
0.04~0.35 |
<0.15 |
| 6082 |
0.7~1.3 |
0.60~1.2 |
<0.50 |
<0.1 |
0.4~1.0 |
<0.20 |
<0.25 |
<0.10 |
| 6351 |
0.7~1.3 |
0.40~0.8 |
<0.50 |
<0.1 |
0.4~0.8 |
<0.20 |
~ |
<0.10 |
2) Mechanical property
| Alloy |
Temper |
Tensile strength |
Yield strength |
Elongation |
|
6063
|
T5 |
≥ 160Mpa |
≥ 110Mpa |
≥ 8% |
| T6 |
≥ 205Mpa |
≥ 180Mpa |
≥ 8% |
| 6061 |
T5 |
≥ 265Mpa |
≥ 245Mpa |
≥ 8% |
Management Systems
(1)EN ISO 9001:2008
With the implementation of Quality Management System , the company management is committed to providing products and services that comply with legal and regulatory requirements and that meet customer requirements , with a view to their dedication to the company. The company was certified by the independent TUV HELLAS, member of TUV NORD Group of Germany to implement a Quality Management System according to the international standard ISO 9001 of 1994 version , the first time, in June 2000 , while in July 2009 certified according to the new , improved standard of ISO 9001 version 2008.
(2)ISO 14001:2004/EN ISO 14001:2004
To ensure the harmonious coexistence of its activities with the natural environment, ALUMIL has established and applies from mid-2002 at the factory in Kilkis, the certified Environmental Management System in accordance with the International Standard ISO 14001:1996
